VIVO Y51A UMT READ BY GSM BISMA












Operation : Read Firmware
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM22)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8916, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK [33]
USERDATA : Normal
Reading Device Information...OK
Device : vivo vivo Y51A [msm8916] [Y51A]
Brand : vivo
Prod.Name : Y51A
Software : LMY47V release-keys, eng.compiler.20170308 [Wed Mar  8 16:23:36 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-02-01
Reading [modem]...Done
Reading [fsc]...Done
Reading [ssd]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [hyp]...Done
Reading [hypbak]...Done
Reading [modemst1]...Done
Reading [modemst2]...Done
Reading [DDR]...Done
Reading [fsg]...Done
Reading [sec]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [survival]...Done
Reading [devinfo]...Done
Reading [system]...Done
Reading [cache]...Done
Reading [persist]...Done
Reading [misc]...Done
Reading [keystore]...Done
Reading [config]...Done
Reading [oem]...Done
Reading [apanic]...Done
Reading [backup]...Done
Reading [reserved]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Reading [gpt_main1]...Done
Reading [gpt_back1]...DoneSevere Error!
Reading [gpt_main2]...Done
Reading [gpt_back2]...DoneSevere Error!
Saved to : C:\UMTool\QcFire\Read\vivo_vivo Y51A_LMY47V release-keys_2017-02-01\
Operation Finished.
QcFire Ver. 11.8