Sparx Neo 9 Plus Tested DUMP BY PANDORA BOX GSM BISMA











Selected model: Infinix X6515 (Infinix X6515)
Operation: Read PTT
Software version: 9.9

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x855E1430, 0x340CB1E6, 0xB4F89AF1, 0xDCFDF532
Get Chip ID... [MT6765]
Get SOC ID... [B38F0F61F1509D3DA44CFF11271FD8CB38EA457A72384E2BBEBBE1693DF4D3C7]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xDF011853434136344710A9814404CAC1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: SCA64G
   EMMC_ID   : 0xDF011853434136344710A9814404CAC1
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0000400000 (4.00Mb)
   EMMC_USER : 0x0E8F000000 (58.23Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  0% - 10% device life time used
   DeviceLifeTimeEstB:  10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand        : Sparx
Product Manufacturer : Deploy PVT Limited
Product Model        : Sparx NEO 9
Product Name         : NEO_9
Product Device       : Sparx_NEO_9
Product Board        : k65v1_64_bsp
Board Platform       : mt6765
Build ID             : 20241009
Build Date           : Wed Oct  9 18:32:05 CST 2024
Display ID           : Sparx_NEO_9_V15_MP_09102024
Security Patch       : 2024-08-05
Version SDK          : 33
Version Release      : 13
Version Codename     : REL
Firmware Version     : 20241009
Userdata FS Type     : EXT4
Read partition "preloader"... OK
Read partition "preloader_backup"... OK
Read partition "pgpt"... OK
Read partition "boot_para"... OK
Read partition "para"... OK
Read partition "expdb"... OK
Read partition "frp"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "md_udc"... OK
Read partition "metadata"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "seccfg"... OK
Read partition "persist"... OK
Read partition "sec1"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Read partition "logo"... OK
Read partition "md1img_a"... OK
Read partition "spmfw_a"... OK
Read partition "scp_a"... OK
Read partition "sspm_a"... OK
Read partition "gz_a"... OK
Read partition "lk_a"... OK
Read partition "boot_a"... OK
Read partition "vendor_boot_a"... OK
Read partition "init_boot_a"... OK
Read partition "dtbo_a"... OK
Read partition "tee_a"... OK
Read partition "vbmeta_a"... OK
Read partition "vbmeta_system_a"... OK
Read partition "vbmeta_vendor_a"... OK
Read partition "md1img_b"... OK
Read partition "spmfw_b"... OK
Read partition "scp_b"... OK
Read partition "sspm_b"... OK
Read partition "gz_b"... OK
Read partition "lk_b"... OK
Read partition "boot_b"... OK
Read partition "vendor_boot_b"... OK
Read partition "init_boot_b"... OK
Read partition "dtbo_b"... OK
Read partition "tee_b"... OK
Read partition "super"... OK
Read partition "vbmeta_b"... OK
Read partition "vbmeta_system_b"... OK
Read partition "vbmeta_vendor_b"... OK
Read partition "otp"... OK
Read partition "flashinfo"... OK
Read partition "sgpt"... OK
Saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X6515%20(Infinix%20X6515)/Infinix_X6515_DUMP_(2025-11-9_19-52-20)/
Dumping Partitions done!